Communication error of RS232
Maxphotonics · Maxphotonics Maxphotonics MFSC 5000W-6000W CW fibre laser
What it means
Laser and PC are not communicating over RS232
Can I keep running?
KB severity: Degraded
The knowledge base lists this as a degraded fault. You may finish the current job if it is safe to do so, but plan a technician visit before normal production.
The knowledge base records some owner-level checks for this fault. That is not a repair procedure from Kerfwise.
Where it points in the machine
communication (RS232 link)
Source: leadongcdn.com (third-party site CDN), 7-Error List (publisher text only)
Source: leadongcdn.com (third-party site CDN), 7-Error List (publisher text only)
Related codes on this system
Related symptoms in the knowledge base
- Laser module will not move
- F1 will not fire the laser
- Fibre source powered (green blink) but no laser output
- CO2 laser tube will not fire although the laser switch is on (Thunder Nova/Mini: causes listed are beam path misalignment, loose PSU or contactor wiring, failed tube or PSU, failed opto-isolator or controller laser signal port)
Do not attempt DIY repair on high-voltage or Class 4 laser equipment. Get a technician. You can request one using the form on this page.
Get a tech on it